Fujitsu ETERNUS DX60 S3 User Manual page 203

Chapter 1 System Management
1.13 Remote Support Management (REMCS)
3
Specify the parameters.
The main setting items are as follows.
●
Manual Transmission
• Incident Number
• Include I/O Module log
• Time Range Specified
• Start Time
• End Time
If an error screen appears under the following conditions, check the parameter settings.
• The incident number has not been entered or is incorrect
• When "Specify" has been selected for "Time Range Specified", but the start time or the end time
has not been entered
• When "Specify" has been selected for "Time Range Specified", and the date specified for start time
is earlier than the specified end time
4
Click the [Run] button.
 A confirmation screen appears.
5
Click the [OK] button.
 Log transmission (Immediately Send Log Manually) is executed.
6
Click the [Done] button to return to the screen when starting this function in
203
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Step 1.
End of procedure
P2X0-1270-13ENZ0