Fujitsu ETERNUS DX60 S3 User Manual page 45

Chapter 1 System Management
1.4 System Management
■ Enabling the SMI-S when the controller firmware version is V10L30 or later (other than the
ETERNUS DX60 S3)
Procedure
1
Click [Setup SMI-S Environment] in [Action].
2
Click the [Start] button.
 A confirmation screen appears.
3
Click the [OK] button.
 SMI-S setting starts.
4
Click the [Done] button to return to the [System Settings] screen.
45
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0