Fujitsu ETERNUS DX60 S3 User Manual page 156

Chapter 1 System Management
1.9 Event/Dump Management
3-3
Click the [Download] button to save the exported log.
 A dialog box to download the file appears.
When exporting the log is complete, save the log file immediately.
3-4
Save the log file.
The default file name is "NASEngineLog_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-
ss_ CMx_serial number for log file.tar.gz". (YYYY-MM-DD_hh-mm-ss: the date and time when the
download screen
segmented log files are given the same name and numbered serially (01 -).)
 If the log file is segmented, download and save the next segment (save all the segmented files).
When saving segmented log files, make sure to save the segment within five minutes. If five
minutes pass before saving the next segment, the log export fails. After finishing saving each
segment, save the following segment immediately.
(Step 3-3) is displayed. x: CM number. When a log file is segmented, the
156
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0