Fujitsu ETERNUS DX60 S3 User Manual page 88

Chapter 1 System Management
1.7 User Management
• "Software" is the dedicated role that is used for external software. A user account with the
"Software" role cannot log in to ETERNUS Web GUI.
• To change the password, select the "Change Password" checkbox.
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
5
Click the [Apply] button.
 A confirmation screen appears.
6
Click the [OK] button.
 The user account setup starts.
7
Click the [Done] button to return to the [Define Role] screen.
■ Delete User Account
The procedure to delete a user accounts is as follows:
Procedure
1
Click [Setup User Account] in [Action].
2
Select the deletion target user accounts (multiple selections can be made).
When a parameter does not satisfy the input conditions
When the "Change Password" checkbox is selected and "New Password" and/or "Confirm New
Password" is not input
When the "Change Password" checkbox is selected and "New Password" does not match
"Confirm New Password"
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
88
End of procedure
P2X0-1270-13ENZ0