Add Role - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.7 User Management
If an error screen appears under the following conditions, check the parameter settings.
• When each parameter fails to satisfy the input conditions
• When the primary server is not specified
• When there is an unspecified parameter for the server
• When the "Domain Name / IP Address" of the Primary server overlaps with that of the Secondary
server
3
Click the [Modify] button.
 A confirmation screen appears.
An error screen appears if the specified IP address of the RADIUS server conflicts with the internal IP
address of the ETERNUS DX. If this occurs, check the parameter settings.
4
Click the [OK] button.
 Setting of the RADIUS Authentication starts.
5
Click the [Done] button to return to the [Define Role] screen.
1.7.4

Add Role

This function combines several user policies and creates a user-specific role (custom role).
Up to 20 roles can be created per storage system.
Policy
The 16 types of access privileges shown below are available.
Status Display
RAID Group Management
Volume - Create / Modify
Volume - Delete / Format
Host Interface Management
NAS Management
Advanced Copy Management
Copy Session Management
Storage Migration Management
Policies
Status display functions (storage system status, RAID group list, volume list,
copy session list, etc.)
RAID group, Thin Provisioning Pool, Eco-mode, hot spare disk setting
functions, etc.
Volume setting functions (register/modify/expand), etc.
Volume setting functions (delete/format), etc.
Host interface management functions (host group settings, port group
settings, LUN group settings, host affinity settings), etc.
NAS setting functions (create NAS interface, create NAS shared folders), etc.
Local Advanced Copy setting functions, Remote Advanced Copy setting
functions, etc.
Advanced Copy session management functions (start/stop/delete), etc.
Storage Migration setting functions (start/suspend/stop/restart/delete path),
etc.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Description
92
End of procedure
P2X0-1270-13ENZ0