Fujitsu ETERNUS DX60 S3 User Manual page 86

Chapter 1 System Management
1.7 User Management
The main setting items are as follows.
●
Add New User Account
• User ID
• New Password
• Confirm New Password
• Role
• Account
• SSH Public Key
• "Software" is the dedicated role that is used for external software. A user account with the
"Software" role cannot log in to ETERNUS Web GUI.
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
-
4
Click the [Apply] button.
 A confirmation screen appears.
5
Click the [OK] button.
 Addition of the user account starts.
6
Click the [Done] button to return to the [Define Role] screen.
■ Edit User Account
The procedure to edit a user accounts is as follows:
Procedure
1
Click [Setup User Account] in [Action].
When a parameter does not satisfy the input conditions
When the user ID is already registered
When "User ID", "New Password" and/or "Confirm New Password" is not input
When "New Password" does not match "Confirm New Password"
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
86
End of procedure
P2X0-1270-13ENZ0