Fujitsu ETERNUS DX60 S3 User Manual page 402

Chapter 4 Connectivity Management
4.2 Host Group Management
3
Add or delete a host in a host group in the following procedures.
■ When adding or deleting a host by selecting from the host list
(1)
Click the [Registered And Now Connected] tab.
(2)
Add or delete hosts.
The main setting item is as follows.
●
Host Group Setting
• Checkbox to select a host
Filter setting
SAS Address
Other Host Group
Host Response
Filter
Input the SAS address that is to be displayed.
SAS hosts matching or partially matching the entered SAS address are displayed.
When not using the SAS address for filtering, leave this item blank.
Input the other host group name that is to be displayed.
SAS hosts which belong to any host groups that match or partially match the entered
name are displayed.
When not using the host group name for filtering, leave this item blank.
Select the host response that is to be displayed.
Any SAS hosts that are allocated to the selected host response are displayed.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Description
402
P2X0-1270-13ENZ0