Fujitsu ETERNUS DX60 S3 User Manual page 929

Appendix A Parameter List
A.6 Thin Provisioning Management
Restrictions for Stripe Depth modification (for TPP)
The following restrictions are applied for RAID groups for which the Stripe Depth value is changed.
• Stripe depth for RAID groups that configure the existing TPPs cannot be changed.
• When selecting drives automatically to create a TPP, the Stripe Depth cannot be changed.
●
RAID Group
• Controlling CM
Description
Input condition/
Display contents
●
Drive Selection ([Tabular] Tab)
• Checkbox to select drives
Description
Input condition/
Display contents
Select the Controlling CM of the RAID group that is to be created.
""Automatic" and the normal CM number ("CE#x CM#y" or "CM#y") that is installed are
displayed (x: CE number, y: CM number).
Select "Automatic" for normal operations. When "Automatic" is selected, the Controlling
CM that is to be allocated is determined by the RAID group number. Refer to
Controlling CM setting" (page 910)
•
For the ETERNUS DX8700 S3/DX8900 S3
-
Automatic
-
CE#x CM#y
•
For the other models
-
Automatic
-
CM#y
Select the checkbox for the drive to be selected.
When selecting drives, refer to
Checkbox
•
Selected
•
Cleared
929
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
"Requirements for selecting drives" (page
"Automatic
563).
P2X0-1270-13ENZ0