Fujitsu ETERNUS DX60 S3 User Manual page 269

Chapter 3 Volume Management
3.1 Create Volume
●
Select RAID Group Information
• Drive Type
• RAID Level
• Number of Member Drives
• When specifying the volume number, select the "Set Value" checkbox and input the volume
number.
• When using the maximum free space in the selected RAID group to create WSVs without specifying
the capacity, select the "Enable" checkbox for "Use all Largest Free Space", and then input the
number of WSVs.
3
Click the [Select RAID Groups] button.
 The [Select RAID Groups] screen appears.
4
Select the RAID group that is to be concatenated (multiple selections can be made).
The main setting item is as follows.
●
Select RAID Groups
• Checkbox to select RAID groups
When a RAID group is configured with a single SSD type (SSD-M or SSD), or configured with both SSD
types (SSD-M and SSD), "SSD" is displayed as the drive type.
269
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0