Stop Copy Session - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 7 Advanced Copy Management

7.2 Stop Copy Session

7.2 Stop Copy Session
This function stops the selected copy session.
This function is used when a session cannot be stopped due to a host error or other causes.
• If one SnapOPC+ session is stopped, all the sessions started earlier than that session are also stopped.
• If one SnapOPC+ session is stopped, an error occurs in all of the Restore OPC sessions that started earlier
than the stopped session and these sessions are also stopped.
• If a SnapOPC or SnapOPC+ session is stopped during a Restore OPC session, an error occurs in the Restore
OPC session and the session is stopped.
• Before stopping Snapshot sessions or Fastclone sessions for VVOL, all the Virtual Volume sessions and
Advanced Copy sessions that are specified for copy destination volumes of the target session must be
deleted.
The procedure to stop a copy session is as follows:
Procedure
1
Select the copy session to be stopped (multiple selections can be made) and click [Stop
Session] in [Action].
 A confirmation screen appears.
2
Click the [OK] button.
 The selected copy session is stopped.
3
Click the [Done] button to return to the [Advanced Copy] screen.
595
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0