Fujitsu ETERNUS DX60 S3 User Manual page 822

Appendix A Parameter List
A.4 Connectivity Management
• CHAP Password
Description
Input condition/
Display contents
• Confirm CHAP Password
Description
Input condition/
Display contents
●
Host Setting
• iSCSI Name
Description
Input condition/
Display contents
For setting items, refer to
A.4.2.3 Add SAS Host Group
For details about this function, refer to
For the factory default settings for this function, refer to
●
Host Group Setting
• Host Group Name
Description
Input condition/
Display contents
Specify the password for the CHAP Authentication.
It is not necessary to specify this item if the CHAP Authentication is not used.
Make sure to set the user name and password together.
Only when the "Change CHAP Password" checkbox is selected, the field is available.
•
12 - 100 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Input the CHAP password again for confirmation.
Only when the "Change CHAP Password" checkbox is selected, the field is available.
•
12 - 100 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Input the iSCSI name of the iSCSI host (required).
•
4 - 223 alphanumeric characters and symbols ('-', '.', ':')
•
The name starts with "iqn." or "eui."
Step (2) (page 374).
"4.2.3 Add SAS Host Group" (page
Specify the host group name.
An existing host group name cannot be used. Refer to
hosts" (page 1053) for details.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
822
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
379).
"Appendix B Add SAS Host Group" (page
"Naming conventions for adding
993).
P2X0-1270-13ENZ0