Chapter 1 System Management
1.5 Utility Management
The procedure to clear all of the cache data is as follows:
Procedure
1
Click [Clear Cache] in [Action].
2
Select the cache to clear.
The main setting item is as follows.
●
Target Cache Settings
•
Target Cache
When "Extreme Cache" or "Extreme Cache Pool" is selected and the clear conditions are not satisfied,
an error occurs. Check the parameter settings.
3
Click the [Clear] button.
A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
•
The system or CM status is not normal
•
The PFM status is not normal (when selecting "Extreme Cache")
•
The status of RAID groups registered as EXCPs is not normal (when selecting "Extreme Cache Pool")
•
Dirty data exists in the cache memory
73
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0