Appendix A Parameter List
A.7 Advanced Copy Management
Total Copy Capacity (Restore OPC is not used)
= Copy capacity for QuickOPC (5GB
Sessions (Restore OPC is not used)
= The number of QuickOPC sessions (10 sessions) = 10 sessions
A.7.4
Modify Copy Parameters
For details about this function, refer to
For the factory default settings for this function, refer to
●
Policy of Snap Data Pool
•
Policy Level 1 (Informational) Threshold
Description
Input condition/
Display contents
•
Policy Level 2 (Warning) Threshold
Description
Input condition/
Display contents
•
Policy Level 3 (Error) Threshold
Description
Input condition/
Display contents
●
SDPE Setting
•
SDPE
Description
Input condition/
Display contents
10 sessions) = 50GB
x
"7.7 Modify Copy Parameters" (page
If the usage of SDP exceeds the specified threshold, the ETERNUS DX notifies that effect
as the Policy Level 1 (Informational).
1 - 97
If the usage of SDP exceeds the specified threshold, the ETERNUS DX notifies that effect
as the Policy Level 2 (Warning).
2 - 98
If the usage of SDP exceeds the specified threshold, the ETERNUS DX notifies that effect
as the Policy Level 3 (Error).
3 - 99
Select SDPE (GB).
•
1
•
2
•
4
941
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
608).
"Appendix B Modify Copy Parameters" (page
1010).
P2X0-1270-13ENZ0