Fujitsu ETERNUS DX60 S3 User Manual page 621

Chapter 7 Advanced Copy Management
7.8 REC Management
14
Select whether to continue registration of storage system information.
The main setting items are as follows.
●
Operation Method Selection
• Operation Method
●
Storage System Information Setting
• Storage System Type
• Box ID
• WWN
15
Click the [Next >>] button.
The displayed screen is different depending on the port setting state.
■ When selecting "Registration by manual operation"
 The [Storage System Configuration Setting] screen appears again. Proceed to
■ When selecting "Finish of Registration by File Reading"
 The [Check Registered Storage System Information] screen appears. Proceed to
16
Check the storage system information and click the [Next >>] button.
 The [Copy Path Creation Storage System Selection] screen appears. Proceed to
(Create)" (page 622).
621
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Step 8.
Step 16.
"Create Copy Path
End of procedure
P2X0-1270-13ENZ0