Fujitsu ETERNUS DX60 S3 User Manual page 715

Appendix A Parameter List
A.1 System Management
A.1.7.7 Setup SNMP Agent Community
For details about this function, refer to
For the factory default settings for this function, refer to
981).
●
Setup SNMP Agent Community
• Community Name
Description
Input condition/
Display contents
• View Name
Description
Input condition/
Display contents
If "ViewALL", "View-mib2", or "View-exmib" is deleted with the procedure in
View" (page
• Allowed SNMP Manager List
Description
Input condition/
Display contents
"1.8.7 Setup SNMP Agent Community" (page
Input the community name to be used when accessing a MIB or sending a trap.
The community name which has already been used cannot be entered.
•
Up to 32 alphanumeric characters and symbols ("! (exclamation mark)", "# (hash
mark)", "& (ampersand)", "_ (underscore)", "+ (plus)", "- (hyphen)", "* (asterisk)" and
"/ (slash)")
•
Spaces
Select the view name to specify the MIB access range for the community.
A "blank" means accessing the MIB is not allowed.
•
ViewALL
•
View-mib2
•
View-exmib
•
The view name, which has been registered using the [Setup SNMP Agent MIB Access
View] function
115), the deleted options are not displayed in "View Name".
Select the IP address of the SNMP Manager which is allowed to access in the community.
Only the selected SNMP Manager is allowed to access.
However, if the Allowed SNMP Agent Manager List has been left blank, all of the SNMP
Agent Managers (*1) are allowed to access.
*1: Not only the SNMP Agent Manager which has been registered in
SNMP Manager" (page
to access.
Checkbox
•
Selected
•
Cleared
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Appendix B Setup SNMP Agent Community" (page
113), but also the other SNMP Agent Managers are allowed
715
120).
"1.8.5 Setup SNMP Agent MIB Access
"1.8.4 Setup
P2X0-1270-13ENZ0