Delete Key Server - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.11 Key Management
The main setting items are as follows.
●
Key Server Setting
• Domain Name / IP Address
• Port No.
• LAN Port
If an error screen appears under the following conditions, check the parameter settings.
• When each parameter fails to satisfy the input conditions
• When inputting a domain name or an IP address that is already used for another key server
• When the IP address that was input and the IP address of the LAN port (MNT or RMT) are the same
• When the IP address that was input and the network address of the LAN port (MNT or RMT)are the
same
3
Click the [Add] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Adding of the key server starts.
5
Click the [Done] button to return to the [Key Management] screen.
1.11.3

Delete Key Server

This function deletes key servers.
A key server that is allocated to a key group cannot be deleted. Refer to the "Master Server" field and the
"Slave Server" field in the [Key Group] screen to check whether the key server is allocated to the key group.
Refer to "Key Group" in "ETERNUS Web GUI User's Guide (Operation)" for details.
The procedure to delete key servers is as follows:
Procedure
1
Select the key server that is to be deleted (multiple selections can be made) and click
[Delete Key Server] in [Action].
 A confirmation screen appears.
169
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0