Set Ssh Public Key - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management

1.3 Set SSH Public Key

1.3 Set SSH Public Key
This function registers, changes, or deletes the current user's (your) SSH client public key.
• When using the SSH Client Key authentication, create a pair of the SSH client public key and the SSH
client secret key in advance, using the creation tool. One public key can be registered per user account.
When this function is executed, the public key is registered in the ETERNUS DX.
• The following types (formats) of public keys can be used:
- IETF style DSA for SSH v2
- IETF style RSA for SSH v2
The maximum of encryption strength of the supported public key is 4096-bit.
For details on the parameters for this function, refer to
The procedure to set the SSH public key is as follows:
Procedure
1
Click [Set SSH Public Key] in [Action].
2
Specify the SSH Public Key.
The main setting item is as follows.
●
SSH Public Key Setting
• SSH Public Key
To delete the SSH client public key, select the "Delete" checkbox and click the [Set] button.
30
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.2 Set SSH Public Key" (page 666).
P2X0-1270-13ENZ0