Fujitsu ETERNUS DX60 S3 User Manual page 790

Appendix A Parameter List
A.3 Volume Management
• Number of Volumes
Description
Input condition/
Display contents
•
When "Volume No." is specified, only one volume can be created at a time. Input "1" for "Number of Volumes".
•
This item is not displayed when "NAS Volume" is selected for the volume type. Only one NAS user volume can be
created at a time.
•
For the ETERNUS DX8700 S3/DX8900 S3, the total number of the volumes that can be created at a time is 1024.
Note that this limitation does not apply to other models.
●
Volume Information
• Use all Largest Free Space
Description
Input condition/
Display contents
•
When "Enable" is selected, the capacity and the unit that are specified for "New Volume" are not available.
•
The capacity for created WSVs is not displayed. Use the [Volume] screen to check the volume capacity after
volume creation is complete.
Specify the number of volumes to be created.
•
When creating "Standard", "SDV", or "SDPV" type volumes
Specify the number of volumes to be created in each RAID group.
Click the [Recalculation of Max Count] button to display the maximum number of
volumes that can be created in each RAID group with the specified capacity. When
the volume capacity is not specified (including when "Use all Largest Free Space" is
selected), the maximum number of volumes that can be created for each RAID group
is displayed.
When "Encryption by CM" is "On", volumes cannot be created in a RAID group with
"Online SED", "Nearline SED", or "SSD SED" for the drive type.
•
When creating "TPV" type volumes
Specify the number of volumes to be created in each TPP.
•
For Standard volumes, SDVs, or SDPVs
1 - 128
•
For TPVs
From 1 to "the maximum number of volumes"
For details on the maximum number of volumes that can be created for each model,
refer to "The maximum number of volumes that can be created for each model" (page
787).
Select the "Enable" checkbox to create the specified number of WSVs with the largest
available free space in the selected RAID group.
WSVs are created by concatenating spaces with the same capacity in multiple RAID
groups. If "Enable" is selected, the specified number of WSVs in the "Number of Volumes"
field are created using the smallest "Largest Free Space" value in the concatenated RAID
groups.
"Enable" checkbox
•
Selected
•
Cleared
790
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0