Fujitsu ETERNUS DX60 S3 User Manual page 851

Appendix A Parameter List
A.4 Connectivity Management
- IPv6 Gateway
Description
Input condition/
Display contents
This item is not displayed when the port type is "iSCSI RA (for older storage system connection)".
- TCP Port No.
Description
Input condition/
Display contents
•
Do not change the TCP port number from 3260 (default value). REC can only be performed when "TCP Port
No." is "3260".
•
This item is not displayed when the port type is "iSCSI RA (for older storage system connection)".
Input the gateway IPv6 address of the target port.
The following IPv6 addresses can be used; "link local address", "global address",
"unique local address", or "6to4 address". Refer to
107) for details. Note that the current setting is displayed by an abbreviation.
"IPv6 Gateway" can be directly input or created automatically.
Click the [Discovery] button to display the [Select IPv6 Gateway] screen. Up to three
"IPv6 Gateway" can be obtained. Select "IPv6 Gateway" and click the [OK] button. The
selected IPv6 address is specified in the entry field.
•
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
Input the TCP port number of the target port.
Click the [Default] button to set the default TCP port number.
0 - 28671
851
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Available IPv6 Address" (page
for details.
P2X0-1270-13ENZ0