Appendix A Parameter List
A.1 System Management
A.1.7.6
Setup SNMP Agent User
For details about this function, refer to
For the factory default settings for this function, refer to
●
Setup SNMP Agent User
•
User Name
Description
Input condition/
Display contents
•
MIB View Setting
Description
Input condition/
Display contents
If "ViewALL", "View-mib2", or "View-exmib" is deleted with the procedure in
View" (page
•
Authentication
Description
Input condition/
Display contents
•
Authentication Method
Description
Input condition/
Display contents
"1.8.6 Setup SNMP Agent User" (page
Input the user name which accesses the SNMP Agent.
The user name which has already been used cannot be entered.
•
8 - 32 alphanumeric characters and symbols ("! (exclamation mark)", "# (hash
mark)", "& (ampersand)", "_ (underscore)", "+ (plus)", "- (hyphen)", "* (asterisk)" and
"/ (slash)")
•
Spaces
Select the view name to specify the MIB access range for the user.
A "blank" means accessing the MIB is not allowed.
•
ViewALL
•
View-mib2
•
View-exmib
•
The view name, which has been registered using the [Setup SNMP Agent MIB Access
View] function
115), the deleted options are not displayed in the [MIB View Setting] screen.
Select whether to "Enable" or "Disable" the authentication.
•
Enable
•
Disable
To enable the authentication, select the authentication method.
•
MD5 (Message Digest 5)
•
SHA (Secure Hash Algorithm)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Appendix B Setup SNMP Agent User" (page
713
117).
"1.8.5 Setup SNMP Agent MIB Access
P2X0-1270-13ENZ0
981).