Fujitsu ETERNUS DX60 S3 User Manual page 347

Chapter 4 Connectivity Management
4.1 Host Affinity Management
5
Select a CA port to configure a host affinity, and click the [OK] button.
 The display returns to the initial screen.
• If a specific host has been selected in the "Host" field, CA ports for which the affinity mode is "OFF"
are not displayed.
• If "All" has been selected in the "Host" field, CA ports with any of the following conditions are not
displayed:
-
-
-
• CA ports that are used for the Storage Cluster function are not displayed.
6
Click the [Browse...] button for the LUN group.
 The [Select LUN Group] screen appears.
The affinity mode is "ON"
The CA ports are used in the CA port group
The CA port is used by another host affinity
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
347
P2X0-1270-13ENZ0