Fujitsu ETERNUS DX60 S3 User Manual page 481

Chapter 4 Connectivity Management
4.7 Host-LU QoS Management
■ Enabling QoS mode
The procedure to enable the QoS mode is as follows:
Procedure
1
Click [Enable QoS] in [Action].
 A confirmation screen appears.
If the QoS mode has already been enabled, [Enable QoS] cannot be clicked.
2
Click the [OK] button.
 Enabling of QoS starts.
3
Click the [Done] button to return to the [Host-LU QoS] screen.
■ Disabling QoS mode
The procedure to disable the QoS mode is as follows:
Procedure
1
Click [Disable QoS] in [Action].
 A confirmation screen appears.
If the QoS mode has already been disabled, [Disable QoS] cannot be clicked.
2
Click the [OK] button.
 Disabling of QoS starts.
481
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0