config router rtrdiscovery lifetime
This command configures the value, in seconds, of the lifetime field of the router advertisement
sent from this interface. The range is the maxinterval to 9000 seconds.
Default
Format
config router rtrdiscovery address
This command configures the address to be used to advertise the router for the interface.
Default
Format
config router rtrdiscovery preference
This command configures the preferability of the address as a default router address, relative to
other router addresses on the same subnet. The range is -2147483648 to -1 to 0 to 1 to
2147483647.
Default
Format
show router rtrdiscovery
This command displays the router discovery information for all interfaces, or a specified interface.
Format
Ad Mode
Max Int
Min Int
Routing Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
3 * maxinterval
config router rtrdiscovery lifetime
<slot.port> <maxinterval-9000>
224.0.0.1
config router rtrdiscovery address
<slot.port> <ipaddr>
0
config router rtrdiscovery preference
<slot.port> <-2147483648-2147483647>
show router rtrdiscovery <slot.port/all>
Displays the advertise mode which indicates whether router dis-
covery is enabled or disabled on this interface.
Displays the maximum advertise interval which is the maximum
time allowed between sending router advertisements from the
interface in seconds.
Displays the minimum advertise interval which is the minimum
time allowed between sending router advertisements from the
interface in seconds.
May 30, 2003 Beta Draft
8-35