Copying A Point Comment - Yamaha RCX240 User Manual

11.2.8.4 Copying a point comment

Point comments can be copied under another point number.
Press (COPY) in "MANUAL>POINT>COMMENT" mode.
1
The message "Copy(####-####,####)>" appears on the guideline.
Enter the point number range.
2
Use to
the point number for the copy destination in the following format.
"(copy start number) – (copy end number), (copy destination number)"
For example, to copy the point comments between P7 and P16 onto the lines after
P107, enter "7 - 16, 107".
Copying a point comment (1)
n
NOTE
Valid point numbers are from 0 to 9999.
Press
3
A confirmation message appears on the guideline.
Press (YES) to copy the point comments.
4
The point data in the specified range is copied.
Press (NO) if you want to cancel copy.
Copying a point comment (2)
, and to enter the point number range for the copy source and
.
11. "MANUAL" mode
Chapter 4 OPERATION
1
2
3
4
5
6
7
8
9
10
4-109