Wiring Safety Points - Yamaha RCX240 User Manual

2. Particularly important cautions
2.3

Wiring safety points

1
w
WARNING
• AlwAYs sHut off All pHAses of tHe power supplY externAllY before stArting
2
c
CAUTION
• Make sure that no foreign matter such as cutting chips or wire scraps enter the
• Always store the cables connected to the robot controller in a conduit or clamp
3
4
• do not modify the cables and do not place any heavy object on them. Handle
• if there is a possibility that the cables connected to the robot controller may be
5
• do not apply excessive loads or impacts to the connectors when making cable
• when disconnecting the cable from the robot controller, detach by gripping the
6
7
8
9
10
1-4
Chapter 1 USING THE ROBOT SAFELY
INSTALLATION OR WIRING WORk. FAILURE TO SHUT OFF ALL PHASES MAY CAUSE
ELECTRICAL SHOCk OR PRODUCT DAMAGE.
robot controller. Malfunctions, breakdown or fire may result if they have entered.
them securely in place. If the cables are not stored in a conduit or properly
clamped, excessive play or movement or mistakenly pulling on the cable may
damage the connector or cables, and poor cable contact
may cause equipment malfunctions.
them carefully to avoid damage. Damaged cables may cause malfunction or
electrical shock.
damaged, protect them with a cover, etc.
connections. The connector pins may become bent or the internal PC board
may be damaged.
connector itself and not by tugging on the cable. Loosen the screws on the
connector (if fastened with the screws), and then disconnect the cable.
Detaching by pulling on the cable itself may damage the connector or cables,
and poor cable contact may cause equipment malfunctions.