Initializing The Files - Yamaha RCX240 User Manual

12. "SYSTEM" mode

12.6.1.3 Initializing the files

1
The data saved on the controller's flash ROM is initialized.
n
NOTE
If the data in the internal memory is destroyed for any reason, it can be restored by
loading the backup data from the internal flash ROM. We recommend backing up
2
the data in the internal flash ROM before starting the robot system.
Press
1
A confirmation message appears on the guidelines.
3
Press
2
Press
4
5
6
The message "0.5: Accessing" appears during initialization.
c
CAUTION
• if data is already written in, the data must be saved after the initialization process.
7
• the data saved on the internal flash roM cannot be restored if any hardware
• if an abnormal process occurs, such as if the power is turned off while initializing
8
9
10
4-306
Chapter 4 OPERATION
(INIT) in the "SYSTEM>BACKUP>FROM" mode.
(YES) to initialize the data.
(NO) to cancel the procedure.
Check of FROM initialization
trouble occurs. Always save the data onto an external PC storage device.
the data, then the data cannot be guaranteed.