Table of Contents
Advertisement
n
NOTE
In PHASER series robot operation, when the servo is first turned on after power-on,
the robot emits a noise (sound) for 0.5 to 2 seconds during the servo-on process and
then enters a servo-on state. This is normal operation for obtaining the necessary
control information by slightly moving the robot and is not an abnormal condition.
Press
(MOTOR) in "UTILITY" mode.
1
Turn the motor power and servo on or off.
2
Press
(On) to turn on the servo.
Press
(Off) to turn off the servo.
Press
(Power) to turn on the motor power supply only.
Servo on/off
To set the servo of each axis to "ON", "OFF" or "FREE", select the axis
3
with the cursor (
When setting the servo of each axis to "ON", the motor power must be turned on
beforehand by the operation in step 2.
Setting the servo of each axis
Set the servo status with
4
/
) keys.
(Servo),
14. "UTILITY" mode
(Brake) or
(Free).
Chapter 4 OPERATION
1
2
3
4
5
6
7
8
9
10
4-313
Advertisement
Chapters
Table of Contents
