10. "PROGRAM" mode
10.7 Resetting an error in the selected program
1
If an error "9.1:Program destroyed" occurs in the selected program data, this function resets the
error and allows you to continue editing.
c
CAUTION
This function resets an error, but does not restore the program data. A problem is
2
probably occurring in the program, so check and correct the program in
"PROGRAM>EDIT" mode.
Press
1
3
A confirmation message appears on the guideline.
4
5
6
Press
2
The program can be edited after resetting the error.
Press
n
NOTE
7
• This function is enabled for each program.
• This reset function does not work if an error "9.3:Memory destroyed" occurs. In this
8
9
10
4-84
Chapter 4 OPERATION
(ERR. RST) in "PROGRAM" mode.
Resetting an error in the selected program
(YES) to reset the error.
(NO) if you want to cancel the error reset.
case, initialize the memory.