Display Poe Interface - H3C S5120-SI Series Command Reference Manual

Default Level
1: Monitor level
Parameters
None
Description
Use the display poe device command to display information about power sourcing equipments
(PSEs).
Examples
# Display the PSE information.
<Sysname> display poe device
PSE ID SlotNo SubSNo PortNum MaxPower(W) State Model
1 1
Table 1-1 display poe device command output description
PSE ID
SlotNo
SubSNo
PortNum
MaxPower(W)
State
Model

display poe interface

Syntax
display poe interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
0 24 370
Field
on LSW124POED
ID of the PSE. For a centralized device, this
field is 1.
Slot number of the PSE. For a centralized
device, this filed is 1.
Sub-slot number of the PSE. For a centralized
device, this field is 0.
Number of PoE interfaces on the PSE
Maximum power of the PSE (W)
PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE fails.
PSE model
1-3
Description