Table of Contents
Advertisement
Figure 45. Installing the drive backplane
Next steps
1. Connect the drive backplane cables to the connectors on the system board and backplane.
2.
Install the
drives.
3. If removed,
install the air
4.
Install the drive backplane
5. Follow the procedure listed in
Side wall brackets
Side and center bracket perfect sealing
The topic lists details on side (right and left) and center bracket perfect sealing available on different configurations.
Table 65. Side and center bracket perfect sealing
Configuration
No BP (0 drive
configuration) chassis
10 x 2.5 inch
chassis (SAS/SATA/
NVMe) chassis
8 x 2.5 inch universal
with fPERC 11
10 x 2.5 inch (NVMe)
(1CPU)
shroud.
cover.
After working inside your
Foam installed on the
right side bracket
Installed
Installed
Installed
Installed
system.
Foam installed on the left side
bracket
Installed
Installed
Not installed
Not installed
Installing and removing system components
Foam installed on the center
bracket
Installed
Installed
Not installed
Not installed
81
Advertisement
Table of Contents
