Management-Address; Maximum-Requests - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

management-address

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

maximum-requests

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
management-address ip-management-address;
[edit protocols lldp]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Specify the management address of the switch to be used in the LLDP Management
type, length, and value (TLV) .
LLDP Management TLV uses the IP address of the switch's management Ethernet
interface ( me0 ) or the IP address of the virtual management Ethernet (VME) interface
if the switch is a Virtual Chassis.
—Management address for the switch.
ip-management-address
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2990
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2759
EX Series Switches Interfaces Overview on page 1239
maximum-requests number;
[edit protocols dot1x authenticator interface (all | [interface-names])]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For 802.1X authentication, configure the maximum number of times an EAPOL request
packet is retransmitted to the supplicant before the authentication session times out.
Two retransmission attempts
number —Number of retransmission attempts.
Range: 1 through 10
Default: 2
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring 802.1X Interface Settings (CLI Procedure) on page 2829
Configuring 802.1X Authentication (J-Web Procedure) on page 2830
Chapter 91: Configuration Statements for Access Control
2919