show route damping
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 284: show route damping Output Fields
Field Name
Field Description
Name of the routing table—for example,
routing-table-name
destinations
Number of destinations for which there are routes in the routing table.
Copyright © 2010, Juniper Networks, Inc.
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the Border Gateway Protocol (BGP) routes for which updates might have been
reduced because of route flap damping.
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
—Display route damping entries that might no longer be valid, but are not
decayed
suppressed.
history
—Display entries that have already been withdrawn, but have been logged.
logical-system (all | logical-system-name)
systems or on a particular logical system.
suppressed
—Display entries that have been suppressed and are no longer being installed
into the forwarding table or exported by routing protocols.
view
clear bgp damping on page 2019
show policy damping on page 2151
show route damping decayed detail on page 2190
show route damping history on page 2190
show route damping history detail on page 2191
Table 284 on page 2187 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
show route damping
.
inet.0
command.
Level of Output
All levels
All levels
2187