Reset Default Ssids And Pre-Shared Keys For The Preconfigured Wi-Fi Access Points - Digi LR54 User Manual

Firmware configuration
3. Set a new password for the admin user. The password must be at least eight characters long
and must contain at least one uppercase letter, one lowercase letter, one number, and one
special character.
(config)> auth user admin password new-password
(config)>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Reset default SSIDs and pre-shared keys for the preconfigured
Wi-Fi access points
For the Wi-Fi enabled LR54W device, by default, the SSIDs and pre-shared keys for the preconfigured
Wi-Fi access points are:
Enabled
n
SSID: Digi-LR54W-serial_number
n
Encryption: WAP2 Personal (PSK)
n
Pre-shared key: The unique password printed on the bottom label of the device.
n

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
LR54 User Guide

Reset default SSIDs and pre-shared keys for the preconfigured Wi-Fi access points

Use Digi Remote Manager to view and manage your
40