Wi-Fi
Configure the Wi-Fi radio's transmit power
The default Wi-Fi transmit power that the Wi-Fi radio will use when in access point or client mode is
100 percent. You can configure the Wi-Fi radio to transmit at a lower power.
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. Click to expand the appropriate Wi-Fi radio. For single-Wi-Fi models, there is only one radio
listed.
5. For Tx power percentage, type or select the appropriate percentage for the Wi-Fi radio's
transmit power.
6. Click Apply to save the configuration and apply the change.
TX54 User Guide
Configure the Wi-Fi radio's transmit power
241