Table of Contents
Advertisement
Wi-Fi
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure the Wi-Fi radio's transmit power
The default Wi-Fi transmit power that the Wi-Fi radio will use when in access point or client mode is
100 percent. You can configure the Wi-Fi radio to transmit at a lower power.
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. For Tx power percentage, type or select the appropriate percentage for the Wi-Fi radio's
transmit power.
5. Click Apply to save the configuration and apply the change.
Command line
Digi Connect EZ 4/4i User Guide
Configure the Wi-Fi radio's transmit power
223
Advertisement
Table of Contents
