Wi-Fi
Wi-Fi configuration
TX54 device has one or two Wi-Fi radios, depending on the model type. You can configure the Wi-Fi
radios for Wi-Fi access point mode or Wi-Fi client mode. By default, the TX54 radios are configured to
use access point mode.
Default access point SSID and password
By default, the TX54 device has one (single-or dual-cellular models) or two (dual-Wi-Fi models) access
points enabled. The default SSID for the access point is:
Digi-TX54-serial_number
The password for the default access point is the unique password as found on the device's label. See
Reset default SSIDs and pre-shared keys for the preconfigured Wi-Fi access points
about changing the default SSID and password.
Default Wi-Fi configuration
The default Wi-Fi configuration of the TX54 device is:
TX54 User Guide
Wi-Fi configuration
for information
232