Wi-Fi Configuration - Digi TX54 User Manual

Wi-Fi
Configure a Wi-Fi access point with no security
Configure a Wi-Fi access point with personal security
Configure a Wi-Fi access point with enterprise security
Show Wi-Fi access point status and statistics
Configure a Wi-Fi client and add client networks
Show Wi-Fi client status and statistics

Wi-Fi configuration

The TX54 device has one or two Wi-Fi radios, depending on the model type. You can configure the Wi-Fi
radios for either Wi-Fi access point mode or Wi-Fi client mode. By default, the TX54 radios are
configured to use access point mode.
A typical configuration for dual-Wi-Fi models is to configure one Wi-Fi radio in access point mode with
one or multiple access points, and configure the other radio, connected to a separate set of antennas,
as a Wi-Fi client to be used as a WAN interface.
TX54 User Guide
Wi-Fi configuration
164
171
177
184
185
192
158