Wi-Fi; Wi-Fi Configuration; Default Access Point Ssid And Password; Default Wi-Fi Configuration - Digi IX20W-PR User Manual

Wi-Fi

Wi-Fi configuration

The Wi-Fi enabled IX20Wdevice has one Wi-Fi radio. You can configure the Wi-Fi radio for Wi-Fi access
point mode and Wi-Fi client mode. By default, the IX20Wradio is configured to use access point mode.
Note When Primary Responder mode is enabled, pre-configured access points are disabled by default.
For more information about Primary Responder mode, see
operation and Primary Responder

Default access point SSID and password

By default, the IX20Wdevice has one access point enabled. The default SSID for the access points is:
Digi-IX20W-serial_number
The password for the default access point is the unique password as found on the device's label. See
Change the default SSID and pre-shared key for the preconfigured Wi-Fi access point
about changing the default SSID and password.

Default Wi-Fi configuration

The default Wi-Fi configuration of the IX20Wdevice is:
Wi-Fi radio
Enabled or disabled
Frequency band
TX power percentage
Access point mode
Channel
Channel width
Beacon interval
Access point
Name
Enabled or disabled
SSID
SSID broadcast
Encyrption
IX20 User Guide
Differences between standard firmware
mode.
Default setting
Enabled
2.4 GHz
100
802.11b/g/n
Automatic
20/40 MHz
100
Default setting
Digi AP
Enabled
Digi-IX20W-serial_number
Enabled
WAP2 Personal (PSK)
Wi-Fi configuration
for information
311