Show Serial Status And Statistics; Serial Status Page - Digi Connect IT 4 User Manual

Serial port
where value is one of:
none
n
rts/cts
n
xon/xoff
n
7. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show serial status and statistics

To show the status and statistics for the serial port:

Web
1. Log into the Connect IT 4 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections, click Serial. See
this page.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show serial
> show serial
Label
--------
Serial 1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Serial Status page

The Serial Status page contains status information about all of the serial ports available on the
device.
Digi Connect IT® 4 User Guide
Serial Status page
command:
Port Enable Mode
----- ------ -----
port1 true login
Show serial status and statistics
for information about the features in
Baudrate
--------
9600
252