Digi Wr64 Leds; Power; Gnss Service; Wi-Fi1 Service - Digi WR64 Hardware Reference Manual

Digi WR64 hardware

Digi WR64 LEDs

The WR64 LEDs are located on the top front panel. The number of LEDs varies by model. During
bootup, the front-panel LEDs light up in sequence to indicate boot progress.

Power

Off: No power.
n
Blinking Blue: Unit is powering on.
n
Blue: Unit has power.
n

GNSS Service

Solid Green: GNSS is enabled and has a valid fix.
n
Blinking Green: GNSS is enabled but does not have a valid fix.
n
Off: GNSS is not enabled.
n

Wi-Fi1 Service

Solid Green: Any of the Wi-Fi Access Points 1 to 4 or Wi-Fi Client 1 interfaces are enabled.
n
Off: None of the Wi-Fi Access Points 1 to 4 or Wi-Fi Client 1 interfaces are enabled.
n

Wi-Fi2 Service

Solid Green: Any of the Wi-Fi Access Points 5 to 8 or Wi-Fi Client 2 are enabled.
n
Off: None of the Wi-Fi Access Points 5 to 8 or Wi-Fi Client 2 are enabled.
n

WWAN1/WWAN2 Signal

Indicates strength of cellular signal.
Off: No service.
n
Yellow: Poor / Fair signal.
n
Green: Good / Excellent signal.
n

WWAN1/WWAN2 Service

Indicates the presence and level of cellular service running on the device.
Off: No service.
n
Blinking Green: 2G/3G/4G connection is coming up.
n
Digi WR64 Hardware Reference
Digi WR64 LEDs
13