Gnss Service; Wi-Fi Service (Single Wi-Fi Models); Wi-Fi1 Service (Dual Wi-Fi Models); Wi-Fi2 Service (Dual Wi-Fi Models) - Digi TX54 User Manual

Digi TX54 hardware reference

GNSS Service

Solid Green: GNSS is enabled and has a valid fix.
n
Blinking Green: GNSS is enabled but does not have a valid fix.
n
Off: GNSS is not enabled.
n

Wi-Fi Service (single Wi-Fi models)

Solid Green: Wi-Fi access points or Wi-Fi clients are enabled.
n
Off: No Wi-Fi access points or Wi-Fi clients are enabled.
n

Wi-Fi1 Service (dual Wi-Fi models)

Solid Green: Wi-Fi access points or Wi-Fi clients using Wi-Fi1 radio are enabled.
n
Off: No Wi-Fi access points or Wi-Fi clients using Wi-Fi1 radio are enabled.
n

Wi-Fi2 Service (dual Wi-Fi models)

Solid Green: Wi-Fi access points or Wi-Fi clients using Wi-Fi2 radio are enabled.
n
Off: No Wi-Fi access points or Wi-Fi clients using Wi-Fi2 radio are enabled.
n

WWAN Signal

Indicates strength of cellular signal.
Off: No service.
n
Yellow: Poor / Fair signal.
n
Green: Good / Excellent signal.
n

WWAN Service

Indicates the presence and level of cellular service running on the device.
Off: No service.
n
Blinking Green: 2G/3G/4G connection is coming up.
n
Solid Yellow: 2G or 3G connection is up.
n
Solid Green: 4G connection is up.
n

Ethernet 1-4 Link and Activity (on rear panel)

The LEDs on the WAN/ETH1, ETH2, ETH3, and ETH4 ports indicate that the Ethernet network interface
is up and there is activity on the network interface.
TX54 User Guide
TX54 LEDs
19