Table of Contents
Advertisement
Services
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Enable or disable modem GNSS support
Note
Modem GNSS support is currently only available with the CM07 CORE modem.
The IX20 device supports the CM07 CORE modem, which provides a GNSS module to determine the
device's location.
To disable support for the modem's GNSS receiver, or enable it if it has been disabled:
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location > Location sources > modem.
4. Click Enable the location source to disable the GNSS receiver, or to enable it if it has been
disabled.
5. Alternatively, you can also delete the modem location source:
a. Click the menu icon (...) next to the modem location source.
b. Click Delete.
IX20 User Guide
Location information
448
Advertisement
Table of Contents
