Https; Accessing The Https Setup Window - Safran VersaSync User Manual

2.8 Configuring Network Settings
5. Click the
6. The established rule appears in the
2.8.6

HTTPS

HTTPS stands for HyperText Transfer Protocol over SSL (Secure Socket Layer).
This TCP/IP protocol is used to transfer and display data securely by adding an
encryption layer to protect the integrity and privacy of data traffic. Certificates
issued by trusted authorities are used for sender/recipient authentication.
Note that VersaSync supports two different modes of HTTPS operation: The
Standard HTTPS Level (default), and a High-Security Level. For more inform-
ation, see
2.8.6.1

Accessing the HTTPS Setup Window

1. Navigate to
MANAGEMENT
left):
78
IPv6—
2001:db8::/48
b8:0:ffff:ffff:ffff:ffff:ffff.
Add button in the
Click the Delete button next to an existing rule, if you want to
Note: In order to configure HTTPS, you need
ADMINISTRATOR rights.
"HTTPS Security Levels" on
MANAGEMENT
> Network
, representing
2001:db8:0:0:0:0:0:0
Action column to add the new rule.
Network Access Rules
page 264.
> NETWORK: HTTPS Setup
Setup, and click HTTPS
CHAPTER
to
2001:d-
window.
delete it.
(or, navigate to
in the Actions panel on the
•
2 VersaSync User Manual Rev. 12