General Network Settings - Safran VersaSync User Manual

2.8 Configuring Network Settings
2.8.1

General Network Settings

To expedite network setup, VersaSync provides the General Settings window,
allowing quick access to the primary network settings.
To access the General Settings window:
1. Navigate to
2. Populate the fields:
72
SSH: This button takes you to the
setting up SSH, see
System Time Message: Setup a once-per-second time message to be
sent to receivers via multicast. For details, see
sage" on page 107.
VLAN: This button will reveal the
more information, see
HTTPS: This button takes you to the
details on setting up HTTPS, see
The Network Services
work services, as well as the Web UI display mode, details see:
Services" on page 75.
The Ports panel not only displays STATUS information, but is used also to
set up and manage VersaSync's network ports via three buttons:
INFO button: Displays the Ethernet port Status window for review
purposes.
GEAR button: Displays the Ethernet port settings window for editing
purposes.
TABLE button: Displays a window that allows adding, editing, and
reviewing Static Routes.
MANAGEMENT > Network
left, click General Settings.
Hostname: This is the server's identity on the network or IP address.
SSH Setup
"SSH" on page 88.
VLAN Setup
"VLAN Support" on
"HTTPS" on
panel is used to enable (ON) and disable (OFF) net-
Setup. In the
CHAPTER
window. For details on
"System Time Mes-
popup window. For
page 106.
HTTPS Setup window. For
page 78.
"Network
Actions Panel on the
•
2 VersaSync User Manual Rev. 12