Required Tools And Parts; Required Gnss Antenna Components; Mounting The Unit - Safran SecureSync 2400 Getting Started Manual

2.4 Required Tools and Parts
The following items are included with your shipment:
2.4

Required Tools and Parts

Depending on your application and system configuration, the following tools and parts may
be required:
2.4.1

Required GNSS Antenna Components

Should you plan on using a GNSS reference with your SecureSync, you will also need the
following items (sold separately):
2.5

Mounting the Unit

SecureSync units can be operated on a desktop or in a rack in a horizontal, right-side-
up position. The location needs to be well-ventilated, clean and accessible.
20
SecureSync unit
QuickStart Guide (printed version)
Ancillary items (except for rack mounting items, the contents of this kit may vary
based on equipment configuration and/or regional requirements)
Purchased optional equipment (note that option cards listed on the purchase order
will be pre-installed in the unit).
Phillips screwdrivers to install the rack-mount ears, and to mount the unit in a 19"-
rack
Ethernet cables
Antenna cable with SMA connector, or conversion cable
Note: The SMA-to-N-type conversion cable included in the ancillary kit
is approved for pull weight of up to 60 lbs. If you are using a heavier
cable, you will need to apply appropriate strain relief.
GNSS antenna with mounting bracket
GNSS antenna surge suppressor (recommended)
GNSS antenna inline amplifier (optional for short cable lengths)
SecureSync 2400 Getting Started Guide Rev. 4