Configuring Inputs/Outputs - Safran VersaSync User Manual

2.7

Configuring Inputs/Outputs

This Section covers the configuration of the inputs and outputs of the I/O con-
nector and SMA connectors on the front panel..
When you configure an input our output via the I/O connector, you will need to
adjust both the pin configuration
(for some types) the settings for that input or output via the Web UI
I/O Settings" on
Figure 2-2:
For more information on the I/O connector, see
on
CHAPTER •
2 VersaSync User Manual Rev. 12
page 48).
I/O connector
page 10.
Note: For instructions on how to configure the
reference, see
MANAGING TIME.
Note: The Network Ports
MANAGEMENT > Network
figuring Network Settings" on
("Assigning I/O Pins" on the next
"The GNSS Reference" on page 193
eth0 and
Setup. For more information, see
page 70.
2.7 Configuring Inputs/Outputs
"Connectors and their Pinouts"
GNSS input
in the Chapter
eth1 can be configured under
page) and
("Configure
"Con-
43