SATCORE SERIES
USER's MANUAL
3.4.4.4 Reset Factory
This feature allows to install the Satcore application that was provided at unit delivery. All software components
are automatically shut down before installation.
Note that this feature does not re-install the operating system.
From Main menu, press the "Enter" button twice to access to the "System" menu. Press the "Right" button four
times, then press the "Enter" button to access to the "Reset Factory" submenu.
Press the "Enter" button to start the reset process.
The computer will reboot automatically after installation.
3.4.4.5 Install App
This feature enables the user to install a new Satcore application from a USB device.
Copy the new Satcore application "setup.exe" on the root directory of a USB device.
Plug the USB device on the Satcore.
From Main menu, press successively the "Enter" button, the "Right" button and the "Enter" button to access to
"Modem" menu.
Press the "Right" button and the "Enter" button to access to the "App" submenu.
Press the "Enter" button to access to the "Install App" functionality.
Press the "Enter" button to start and confirm the installation.
The computer will reboot automatically after installation
3.4.4.6 Start/Stop FTP/SFTP service
To be completed soon.
3.4.4.7 Add configuration file
To be completed soon.
ZODIAC DATA SYSTEMS PROPRIETARY
D102751
ZDS Ref :
Issue : 1
Rev.: 0
Date : July 11, 2019
Page 76