Asynchronous Write Operation; Non-Multiplexed Asynchronous Write Operation - Texas Instruments OMAP5912 Reference Manual

Multimedia processor device overview and architecture

Hide thumbs Also See for OMAP5912:

Table of Contents

Asynchronous 16-Bit Read Operation with Ready on 16-Bit Multiplexed

Address and Data Memory. RDWST=2 FCLKDIV=0 OESETUP=2 OEHOLD = 0

ADVHOLD = 0 BTWST = 0, BTMODE = 0

FLASH.A(25:16)

FLASH.A/D(15:0)

FLASH.BE(1:0)

Asynchronous Write Operation

The asynchronous write is the only write protocol supported by the EMIFS.

The asynchronous write access protocol is used in all EMIFS modes,

whatever the CS configuration register RDMODE value is.

Valid address

OMAP3.2 Subsystem

Traffic Controller

Table of Contents