OMAP5912 Description
MCSI1
Figure 7.
MCSI1 Interface
MCSI1
CLK_OUT
CLK_OUT_Z
CLK_IN
FSYNCH_OUT
FSYNCH_OUT_Z
FSYNCH_IN
TXD
TXD_Z
RXD
VFSRX
34
Introduction
The MCSI1 is a multichannel serial interface, half-duplex, master/slave.
MCSI1 can be used in OMAP5912 to interface the Bluetooth voice module.
In this case, the interface is an 8-kHz frame serial port, 8-bit data transfer. It
is a 4-wire interface with a bidirectional serial clock and frame synchronization.
If the Bluetooth baseband device is not synchronous with the modem network,
the Bluetooth voice interface receives the clock and frame synchronization
from OMAP5912 MCSI1.
OMAP5912
Configreg
Configreg
0
Tie-off
Configreg
MCSI1.CLK
MCSI1.SYNC
MCSI1.DOUT
MCSI1.DIN
BT Chipset µLaw
voice codec
interface
SPRU748A