Available I/Os Per Uart - Texas Instruments OMAP5912 Reference Manual

Available I/Os per UART

Table 9. Available I/Os per UART
McBSP
SPRU748A
Signal UART1
RX Yes
TX Yes
RTS Yes
CTS Yes
DSR By mux
DTR By mux
SD_IRDA No
BD_CLK No
For more detail on I/Os, see Appendix B, Inputs/Outputs.
The McBSP is a full-duplex serial interface. For example, it can be used to
emulate the I2S protocol for interface to an external codec audio device.
OMAP5912 Description
UART2 UART3
Yes Yes
Yes Yes
Yes By mux
Yes By mux
No By mux
No By mux
No By mux
Yes No
Introduction 39